vNet PoE Logger Interface Specifications

Feature	vNet PoE Interface (CDL-VNET-P)
Logger Compatibility	v6.00 hardware and higher (Includes Models: VL & SP 2000, 1000, 1016, 1416, 1400)
Ethernet Connectivity	IEEE 802.3af, 10Base-T Connectivity cable Category 5/5e; RJ-45 connector; 1.83m cable included
Connectivity Cable	Category 5/5e; RJ-45 connector; 1.83m cable included
LED Indicators	link, activity, power, logger communications
Device Configuration	HTTP Web Interface, PC-based configuration wizard
Addressing	DHCP/RARP, ARP-Ping, Static IP for IP address assignment, NetBIOS name
Firmware	Field upgradable firmware
Power Consumption	625mW typical, 700mW max
Power Supply (Included but not required when using PoE)	North America: 12VDC/0.5 A max out, 120VAC in International: 12VDC/1.66A max out, 100-240VAC in
Power Input (Optional, for use without PoE)	12-30VDC, plugs into vNet jack labeled 12V
Regulatory	FCC Class A, CE EN 55011, Group 1, Class A; EN 61000-4-2 to -6; RoHS; WEEE
Heating Effect on Measurements	Temperature rise from electronics (important only for loggers with internal sensors): less than 0.05°C as seen by the logger sensor.
Environmental Operating	-25 to 70°C, 0 to 90% RH non-condensing and not to exceed a mixing ratio of 38.5g/Kg Storage: -40 to 85°C
Dimensions/Weight	10.2cm; Width: 10.2cm; Height: 4.3cm Weight: 180g