Modular refrigerated warehouses for the chemical and pharmaceutical industry - PE-Serie
Together with Angelantoni Life Science we offer a wide range of cold storage rooms used to preserve vaccines, drugs and other products for the pharmaceutical healthcare industry.
The main features of the products in this range are their high reliability and the option of offering customised solutions. Our cold storage rooms are manufactured in compliance with the standards in force.
Characteristics of the range
- Quick and easy assembly
- Rounded inside corners
- Precise temperature control (luminous intensity and humidity on demand)
- Insulation material: polyurethane, polystyrene and mineral wool
- Direct and indirect cooling systems
- ATEX execution on demand
- Maximum fire resistance rating: A2s1d0
Retrofit - Revamping and refurbishment as an alternative to buying new.
Overhauling or replacing cooling systems, seals and wear parts can give older solutions a new lease of life and save money compared to buying new. What should be considered when modernizing cold rooms and in which cases does it pay off?
Contact us and we will calculate the best option for your company!
0721 – 62 69 08 50
How a PE series prefabricated room is made
Insulated floors cladded in pre-painted sheetmetal or embossed diamond aluminium or no-slip stainless steel.
Our floors can bear even heavy loads such as those carried by lift trucks and forklifts. The floor is provided with a draining device to simplify cleaning and drain off fluid spills. The inside corners are rounded to easily remove filth.
The walls are made of modular panels with the following technical features:
• Core in expanded polyurethane, polystyrene or mineral wool.
• Pre-painted steel or stainless steel cladding (AISI 304 or 316). Panel thickness from 50 to 200 mm.
The service door is fitted with high-quality rubber or silicon gaskets and equipped with a microswitch to automatically switch off the fan when the door is opened.
There is a door on the outside with a handle with a key closing system, which can be opened in any case from the inside. Internal emergency button.
Manually or automatically opened sliding doors can be supplied on demand, complete with air wave safety devices. The door frame is heated by a specific built-in
electric heating element. On demand, protective curtains in PVC can be installed on the doors to limit heat loss when opened.
Modular construction of walk-in cooling chambers
Prefabricated cold storage room with 150 mm thick panels plasticised inside and outside.
Outer dimensions: m 40.50 (L) x 8.00 (W) x 10.20 (H)
Sliding doors 2m (W) x 3m (H) net clearance, automatic opening, with safety closure.
Operating temperature -20 °C.
Prefabricated cold storage room with 100 mm thick panels plasticised inside and
outside.
Outer dimensions: m 28.00 (L) x 11.6 (W) x 8.5 (H)
Sliding doors 2.00m (W) x 2.5m (H) net clearance, automatic opening, with safety closure.
Operating temperature +2 °C.
Custom design chilling units
We design and manufacture custom-made chilling units, according to the specific requirements of the Customer. Safe, eco-friendly and efficient installations, equipped with modern safety systems, low environmental impact and considerably higher efficiency than old generation installations (R507/R404A).
- Heat output: from 10 to 2,000 kW
- Working temperature: from 20 °C to -80 °C
- Executions for classified or safe area
- Compliance with the main international design and
- construction principles (PED - GMP - ASME - ANSI, etc.)
- Multidisciplinary design (mechanical, electric and instrumental) both in the preliminary design stage and in the execution stage
- Project management, supplier control and testing during installation
Multi use monobloc chilling units
For over 80 years, Angelantoni has been designing and building a large variety of refrigeration systems, especially intended for the chemical and pharmaceutical industry, with the support of professionals with longtime experience in the design and supply of refrigeration systems for Italian and international customers.
Our competences are the standardised production of monobloc brine chilling units (mixture of water and ethylene or NaCl2 glycol) down to -30°C. The standard chilling units can also be supplied in versions for temperatures down to -50°C with double stage or screw compressors using suitable brine liquids.
All installations are equipped with automatic control and monitoring systems of the operating conditions. Alarm systems, with possible redundancy, to meet the strictest reliability requirements. The alarms triggered by the system can be transmitted to the control room via text messages or e-mail.
Give us a call
and we will discuss your requirements, the cost, and everything else you would like to know, in an informal, obligation-free conversation.
Why not right now?
0721 - 62 69 08 50