Heat protection container for thermal insulation of data loggers
S-Micro Thermal Protection 1
Heat protection up to 220 °C for a maximum of 13 minutes
You can request additional calibration points up to 220 °C for the probe of the S-Micro data logger. The maximum operating temperature of the data logger itself is 140 °C.
- +
Technical specifications
Data sheet
Dimensions 39 h x 40 Ø (mm) Weight 94 g Minimum probe length 40 mm Supported data loggers S-Micro
S-Micro Thermal Protection 2
Heat protection up to 220 °C for a maximum of 39 minutes.
You can request additional calibration points up to 220 °C for the probe of the S-Micro data logger. The maximum operating temperature of the data logger itself is 140 °C.
- +
Technical specifications
Data sheet
Dimensions 69 h x 66 Ø (mm) Weight 482 g Minimum probe length 50 mm Supported data loggers S-Micro
S-Micro XL / S-MicroW XL Thermal protection 1
Heat protection up to 250 °C for a maximum of 17 minutes.
You can request additional calibration points up to 220 °C for the probe of the S-Micro XL data logger, up to 250 °Cfor the probe of the S-MicroW XL data logger and up to 300 °C for the S-MicroW XL Bendable The maximum operating temperature of the data logger itself is 140 °C.
- +
Technical specifications
Data sheet
Dimensions 190 h x 37 Ø (mm) Weight 417 g Minimum probe length 50 mm Supported data loggers S-Micro XL/S-MicroW XL
S-Micro XL / S-MicroW XL Thermal protection 2
Heat protection up to 250 °C for a maximum of 134 minutes.
Must be used in combination with S-Micro XL / S-MicroW XL thermal protection 1. You can request additional calibration points up to 220 °C for the S-MicroW XL probe, up to 250 °C for the S-MicroW XL probe and up to 300 °C for the S-MicroW XL Bendable. The maximum operating temperature of the data loggers themselves is 140 °C.
- +
Technical specifications[
Data sheet
Dimensions 190 h x 37 Ø (mm) Weight 417 g Minimum probe length 50 mm Supported data loggers S-Micro XL/S-MicroW XL
Mounting options for Tecnosoft validation loggers
The success of the pasteurization and sterilization process is verified when the probe is correctly positioned in the core of the product. It is also very important that the probes are correctly positioned in the hot/cold spot, depending on the process. Tecnosoft has different fixing systems to position the logger and insert the probes in any type of food packaging.
Fastening in bags
Fastening in vessels
Fastening in cans
Fixing for external probes in closed packages
Applicable for cans, jars, metal lids, bottle caps or any other container. The probes can be depth-adjustably inserted inside the containers and precisely adjusted to the core of the product. This allows you to validate different types of products and packaging with a single logger.
Mounting base and adhesive rubber
Options for internal mounting of loggers in jars, jars, bottles, flacons and other types of packaging. With different length spacers (10 mm, 20 mm, 30 mm, 40 mm) and high temperature resistant rubber, multiple types of products and packaging can be validated with just one logger.
Fastening with self-adhesive rubber
Fastening with spacer on the lid
Fastening with spacer in the Object