Remote Monitoring and Weather Station HOBO RX3000
The HOBO RX3000 is a remote monitoring station that allows you to continuously record measurement data and view them in real time from any location. At the centre of the system is the internet-capable RX3000 base station, which acts as a data logger and connects to external sensors. A multitude of parameters can be measured, giving you maximum flexibility during configuration and use of the station.
A highlight: New self-recognising plug-and-play sensors automatically transmit configuration information to the RX3000. Sensor parameters stored in the SD sensor eliminate the need for programming or extensive set-up and support rapid deployment.
The HOBO RX3000 station offers near endless measuring capabilities
The weatherproof HOBO RX3000 Station is a data logger with an internet connection that allows you to record a variety of energy and weather related parameters. For monitoring weather data, plug-and-play sensors are available. Optional sensor modules enable recording measurements of analogue sensors. In addition, the station can provide external sensors with a 12V supply, extending the measurement capabilities even further. This flexible sensor support is ideal for environmental monitoring projects where measurement requirements change over time.The recorded data are sent at adjustable intervals to the web-based HOBOlink software and allow constant access to your data, both real-time and historical. Inside its weatherproof enclosure, the station features an LCD for monitoring current system configuration and for connecting to HOBOlink. The weather data logger combines the flexibility and sensor quality of more expensive systems with an integrated display and easy plug-and-play operation.
Take a look at the data sheet of the RX3000 base station.
Next-generation remote monitoring
- Huge selection of sensors
- Web-based data access
- Alarm notification via SMS and email
- Weather station kit available in research quality
- Plug-and-play operation
- Robust, weatherproof enclosure
- LCD for configuration and analysis
- Analog input modules and relay modules available
Please note!
The HOBO RX3000 is an extremely flexible data logger with a large number of expansion variants. Please contact us so that we can build your individual system with you.
Self-contained Weather Station RX3000
Being a self-contained weather station, the HOBO RX3000 offers all the components needed for any type of weather monitoring. It is an all-in-one solution that allows accessing of real-time weather data from almost anywhere in the world.
The weather data are sent via the GSM network and uninterrupted power is guaranteed using a solar panel. The data are presented in a web-based software for desktop and mobile devices.
The Weather Station can be configured with 15 plug-and-play smart sensors, which measure a range of weather parameters such as temperature, relative humidity, precipitation, soil moisture, wind speed and direction, leaf wetness, air pressure, photosynthetic active radiation (PAR) and solar radiation.
Discover the possibilities of this weather station for monitoring in:
- Meteorology
- Agriculture
- University and research
- Sports regions
A multitude of parameters for maximum flexibility
The RX3000 station allows you to configure up to 10 smart sensors via plug-and-play, and connect an additional two modules. One module can accommodate 4 analogue sensors, another is available with 3 relay outputs that can control accessories depending on alarm conditions.
Equipping the RX3000 Station with a wireless module enables the use of up to 50 wireless sensors.
| Environment Monitoring and Outdoors | Room Monitoring and Indoors | Energy and Electricity |
| Leaf Wetness | Volatile Organic Compounds (VOC) | Amps (A) |
| Soil Moisture | Carbon Dioxide | Ampere Hours (Ah) |
| Pulse Input | Air Velocity | Compressed air flow |
| Carbon Dioxide | Relative Humidity | Differential Pressure |
| Light Intensity | Temperature | Events and Pulses |
| Barometric Pressure | DC Voltage | |
| Air Velocity | Direct Current | |
| Rainfall | Kilowatts (kW) | |
| PAR | Kilowatt Hours (kWh) | |
| Relative Humidity | Power Factor (PF) | |
| Solar Radiation | Volt (V) | |
| Dew point | Volt Ampere (VA) | |
| Temperature | Volt-Ampere Reactive | |
| Water Flow | Volt-Ampere Reactive Hours | |
| Water level | Watts (W) | |
| Wind Speed | Watt Hours (Wh) | |
| Wind Direction | AC Voltage | |
| Direct current (4-20 mA) |
RX3000 4-channel analogue module
- Input to 33V
- 15-bit resolution and high accuracy
- Separate logging rate per module
HOBOnet Manager
The HOBOnet Wireless Manager module can be installed into the RX3000 station and allows the use of up to 50 wireless sensors. With this, the data logger can be used as a control center for monitoring large areas.Learn more about the HOBOnet field monitoring system.
RX3000 Relay Module
Each relay contact can be configured individually via HOBOlink.
Water Level Sensor Module
With the NEW RX3000 Water Level Sensor Module you're able to monitor water level, pressure, and temperature, as well as barometric pressure, with the HOBO RX3000 Remote Monitoring Station.Datasheet
Plug-and-play and connect-and-play allow quick setup and deployment
Avoid complicated configuration and cabling. Both the wired HOBO smart sensors and the wireless sensors are ready to use after establishing a link to the RX3000 base station and start recording immediately. The built-in LCD helps you check all aspects of system operation before leaving the site, such as sensor connections, signal strength and other parameters.
The RX3000 can accommodate up to 10 plug-and-play smart sensors. Simply connect your sensor and it will be detected automatically - no programming, wiring or calibration required.
24/7 data access via web-based software
The HOBO RX3000 station sends data directly to the HOBOlink software, which you can access via a web browser.
HOBOlink makes it easy for you to access both current and historical weather data, manage and control your RX3000 station, and configure alerts. You can also schedule the automatic delivery of data.
RX3000 Models
| RX3004 | Connection via GSM/UMTS (4G) |
The use of the cellular network requires a SIM card. Contact us for dedicated HOBO data plans.
Technical Specifications
| Area of Application | Indoors and outdoors |
| Power supply | Solar panel, batteries or external power supply (24V) |
| Memory | 32 MB, 2 million measurements, continuous recording |
| Operating Range | -40 °C to +60 °C |
| Environmental Rating | Weatherproof enclosure, NEMA 4x |
| DISPLAY | LCD for on-site system verification and configuration |
| Software | HOBOLink |