GPS data logger MSR175plus for shock and climate
Where and when exactly did critical events such as shocks, impacts, blows or temperature fluctuations occur during the transportation or storage of sensitive cargo that were outside the preset tolerance limit?
The new MSR175plus is equipped with a GPS/GNSS (Global Navigation Satellite System) receiver so that this question can be answered quickly and conclusively. The satellite-based position data is stored by the data logger, allowing the location of transported goods to be quickly determined and documented in the event of damage. Localize critical transport events using GPS tracking!
Our GPS data logger acts like a "black box" that uses sensors to detect critical events and records their position using GPS and a time stamp. The special feature of the MSR175plus: shocks are recorded simultaneously with a ±15 g and a ±200 g acceleration sensor .
Highlights of the MSR175plus GPS data logger:
- Simultaneous shock detection by 3-axis acceleration sensors ±15 g and ±200 g
- Effective measuring rate of up to 6,400/s
- 1 internal temperature, humidity, pressure and light sensor each - measuring rate every 10 minutes
- 3 selectable measurement/storage intervals, setting of threshold values
- Memory capacity 4 million measured values
- Rechargeable LiPo battery 2,400 mAh
- Recording duration with GPS tracking up to 8 weeks, without GPS tracking at least 1 year
- Replaceable battery
Available in 1 Variant
Variant 1 | Two internal 3-axis acceleration sensors (±15 g and ±200 g) as well as an internal temperature sensor (-20 to +65 °C), an internal sensor for relative humidity (0 to 100 %), air pressure (0 to 2000 mbar) and light (0 to 65,000 lx) as well as GPS/GNSS receiver. |
Item No: MSR175B56T6H3P5AA5L3G |
Euro 1,072.00 |
- +
Exceptionally high measurement rate for shock measurements
Get an accurate picture of shock events and ensure clear facts for proof of causation and damage.
The two 3-axis accelerometers (±15 g and ±200 g) integrated in the MSR175plus record critical events such as shocks and impacts at a measurement rate of up to 6,400 measurements per second. This high measuring rate ensures that the logger can also detect very dynamic and short-term impacts, where other loggers with a lower measuring rate can only detect such an event by chance. - +
Best price/performance ratio
The MSR175plus is not the cheapest, but the most "value-for-money" solution on the market.
You will find cheaper and similar data loggers with GPS on the market, but these do not come close to the performance of the MSR175plus. The MSR175plus GPS data logger is superior to other products due to its high sampling rate, high storage capacity and accuracy in a very compact format. The fact that the data logger has two integrated 3-axis acceleration sensors (±15 g and ±200 g) allows you to adjust the data logger optimally to your application. This gives it a level of flexibility that is not possible with many competitor products. When deciding on a logger, it is often not clear whether 15 g is sufficient or whether 200 g would be better for the application in question. With the MSR175plus, both options are available.
The additional temperature, humidity, pressure and light sensors ensure that the most important physical measured variables are covered by one logger. The logger is equipped with a GPS/GNSS receiver so that critical transport events can be localized quickly.
In addition to excellent customer service, benefit from the high reliability and durability of the data logger manufactured in Switzerland. - +
Easy handling, powerful software
You do not need to spend a lot of time training or buy expensive software to use the MSR175plus GPS data logger.
Unlike some competitor products, the powerful PC software is included with the MSR175plus. With the MSR175 dashboard software, configuring the MSR175plus and reading out the measurement data via USB is child's play. To create an automatic report, simply click on the MSR ReportGenerator included in the software package. And the basic version of the MSR ShockViewer analysis software is available to the customer for detailed evaluations.
Technical information on the sensors
Measured variable | Measuring range | Measuring accuracy | Measuring/storage rate |
3-axis acceleration | ±15 g and ±200 g (-20 to +65 °C) | ±15 g sensor ±0.15 g (0...5 g, +25 °C) ±0.3 g (5...15 g, +25 °C) ±200 g sensor ±2 g (0...15 g, +25 °C) ±5 g (15...100 g, +25 °C) ±10 g (100...200 g, +25 °C) |
up to 1,600/s (±15 %) up to 6,400/s (±15 %) |
Temperature range | -20 to +65 °C | ±0.5 °C (-10 ...+65 °C) | every 10 min. |
Relative humidity | 0 to 100 % rel. humidity (-20 to +65 °C) |
±2 % rel. humidity (10 to 85 %, 0 to +40 °C) ±4 % rel. humidity (85 to 95 %, 0 to +40 °C) |
every 10 min. |
Air pressure | 0 to 2,000 mbar absolute (-20 to +65 °C) |
±2.5 mbar (750 to 1100 mbar absolute, +25 °C) |
every 10 min. |
Light | 0 to 83,000 lx | max. sensitivity at 550 nm | every 10 min. |
General technical data for the MSR175plus data logger with GPS tracking
Memory capacity | over 4,000,000 measured values |
GNSS position data | GPS (optional: GLONASS, Galileo, Beidou) |
Medium | Air |
Button | Start measurement, query status, test GPS reception |
Power supply | Lithium-polymer battery 2,400 mAh, rechargeable via USB port, recording duration with activated GPS tracking up to 8 weeks, without GPS tracking at least 1 year |
Interface | USB PORT |
PC software | MSR175 dashboard software, MSR ReportGenerator, MSR ShockViewer (basic version) PC requirements: Windows 7 or higher, USB interface |
Operating conditions: Temperature |
-20 to +65 °C |
Optimum storage conditions: Temperature Humidity |
+5 °C to +45 °C (ideal storage conditions for battery) 10 to 95 % relative humidity, non-condensing |
Standards | The MSR175 complies with the EU RoHS / WEEE directive. |