DataTrace® - insulated container To protect electronics and battery from excessive heat exposure
If the process you want to monitor exceeds temperatures of +140°C (the upper temperature limit of the Micropack data loggers), the electronics and battery must be protected from excessive heat. Depending on the application, you can choose one of the 10 different DataTrace® insulated containers (thermal protection containers).
These containers are designed to protect the logger body from the high temperatures, but expose the sensor itself to the environment being monitored. All containers work excellently in dry environments, most even in liquids such as hot oil. The containers not only protect against overtemperature (ambient temperatures up to +400°C), but also in extremely cold environments.
Several different insulated containers are available, choose the right one for your application:
Typical applications:
- Depyrogenization ovens
- Low temperature freezers
- Baking line monitoring
- Hot air sterilization
- Frying oil monitoring
- Continuous ovens
- Textile and carpet processing
- Powder coating
- and many more ...
Model 2150 - Isolation container for MPRF data logger
Model 2150 - Technical data
| Dimensions | Cylindrical, Ø 50mm, length 152mm |
| Capacity | One MPRF logger |
| Insulation material | PTFE |
| Application | Dry only |
Typical dwell times |
|
| Temperature | Maximum time |
| +250°C | 27 minutes |
| +350°C | 20 minutes |
Model 3000 - Moderate Temperatures
The Model 3000 is a cost effective solution to protect a single logger in dry or liquid applications.
Model 3000 - Technical data
| Dimensions | Cylindrical, Ø 75mm, length 120mm |
| Capacity | One MPIII logger |
| Insulation material | PTFE |
| Application | Dry or in liquids |
Typical dwell times |
|
| Temperature | Maximum time |
| +250°C | 59 minutes |
| +350°C | 42 minutes |
Model 3080 - Multi-Logger
The Model 3080 offers the most economical solution per measurement channel by protecting three Micropack III loggers in moderate temperatures.
Model 3080 - Technical data
| Dimensions | Rectangular container 95mm x 82mm x 46mm |
| Capacity | Three MPIII loggers |
| Insulation material | PTFE, carbon |
| Usage | Dry only |
Typical dwell times |
|
| Temperature | Maximum time |
| +250°C | 36 minutes |
| +350°C | 27 minutes |
Models 3070/3071 - Single logger
Variant of model 3080 with the same characteristics for a single logger.
Models 3070/3071 - Technical data
| Dimensions | Rectangular container 64mm x 86mm x 44mm |
| Capacity | One MPIII with one probe (3070) or two probes (3071) |
| Insulation material | PTFE, carbon |
| Application | Dry only |
Typical dwell times |
|
| Temperature | Maximum time |
| +250°C | 36 minutes |
| +350°C | 27 minutes |
Models 3140, 3141, 3200 & 3400 - High temperature
The ultimate in insulated containers - choose between three different Dewar containers with a diameter of 50 mm. The largest - model 3400 - protects your loggers from temperatures above +350°C for several hours.
Models 3140, 3141, 3200, 3400 - Technical data
| Model 3140 | Model 3141 | Model 3200 | Model 3400 | |
| Model dimensions | Cylindrical, Ø 50mm, length 150mm |
Cylindrical, Ø 35mm, length 150mm |
Cylindrical, Ø 50mm, length 200mm |
Cylindrical, Ø 50mm, length 400mm |
| Capacity | One MPIII logger | One MPIII logger | One MPIII logger | One MPIII logger |
| Insulation material | Dewar vessel, PTFE | Dewar flask, PTFE | Dewar vessel, PTFE | Dewar flask, PTFE |
| Uses | Dry or in liquids | Dry or in liquids | Dry or in liquids | Dry or in liquids |
| Temperature | Maximum duration | Maximum duration | Maximum duration | Maximum duration |
| +250°C | 109 minutes | 87 minutes | 195 minutes | 380 minutes |
| +350°C | 77 minutes | 54 minutes | 135 minutes | 240 minutes |
Model 3175 - Slim design
When space is at a premium - e.g. in depyrogenation ovens - the Dewar Model 3175 with 30mm diameter is an excellent choice to give your Micropack III loggers the best possible protection.
Model 3175 - Technical data
| Dimensions | Cylindrical, Ø 30mm, length 175mm |
| Data logger | One MPIII |
| Insulation material | Dewar flask, PTFE |
| Application | Dry or liquids |
Typical residence times |
|
| Temperature | Maximum duration |
| +250°C | 93 minutes |
| +350°C | 61 minutes |
